Tillet STBT tall seat mount
Tillett STBT Standard Taller Seat Mounting Bracket
The STBT bracket is needed for regular saloon cars, which require slightly taller brackets in order to sit at the correct position.. They are made from 5mm thick black powder coated aluminium and allow the seat to be tipped, raised and lowered using the various hole and slot combinations. The lower slots in the base of the bracket enable them to fit directly on the Tillett STRO and PTRO seat adjustment runners.
The optional aluminium “Pegged spacer kit” can also be used in these brackets to strengthen the front slots in the event of an accident.
60mm taller than the STBI and STBO models.
-Flat floor bracket with 2° angle on sides to match Tillett seats B6S, B6SXL, B6*, B6 XL, B7, B7XL, B8, B9, B10 and C1 car seats (* side mount version only).
-Made from 5mm thick aluminium with textured black powder coated finish.
-The slot and hole options in the brackets allow the seat to be tipped, raised and lowered.
-Lower slot dimension enables them to fit directly on the Tillett STRO and PTRO seat adjustment runners. (Please note we advise against using any seat adjustment runners in a race car, as they are only intended for road use).
Tillett STBT Standard Taller Seat Mounting Bracket
The STBT bracket is needed for regular saloon cars, which require slightly taller brackets in order to sit at the correct position.. They are made from 5mm thick black powder coated aluminium and allow the seat to be tipped, raised and lowered using the various hole and slot combinations. The lower slots in the base of the bracket enable them to fit directly on the Tillett STRO and PTRO seat adjustment runners.
The optional aluminium “Pegged spacer kit” can also be used in these brackets to strengthen the front slots in the event of an accident.
60mm taller than the STBI and STBO models.
-Flat floor bracket with 2° angle on sides to match Tillett seats B6S, B6SXL, B6*, B6 XL, B7, B7XL, B8, B9, B10 and C1 car seats (* side mount version only).
-Made from 5mm thick aluminium with textured black powder coated finish.
-The slot and hole options in the brackets allow the seat to be tipped, raised and lowered.
-Lower slot dimension enables them to fit directly on the Tillett STRO and PTRO seat adjustment runners. (Please note we advise against using any seat adjustment runners in a race car, as they are only intended for road use).
Tillett STBT Standard Taller Seat Mounting Bracket
The STBT bracket is needed for regular saloon cars, which require slightly taller brackets in order to sit at the correct position.. They are made from 5mm thick black powder coated aluminium and allow the seat to be tipped, raised and lowered using the various hole and slot combinations. The lower slots in the base of the bracket enable them to fit directly on the Tillett STRO and PTRO seat adjustment runners.
The optional aluminium “Pegged spacer kit” can also be used in these brackets to strengthen the front slots in the event of an accident.
60mm taller than the STBI and STBO models.
-Flat floor bracket with 2° angle on sides to match Tillett seats B6S, B6SXL, B6*, B6 XL, B7, B7XL, B8, B9, B10 and C1 car seats (* side mount version only).
-Made from 5mm thick aluminium with textured black powder coated finish.
-The slot and hole options in the brackets allow the seat to be tipped, raised and lowered.
-Lower slot dimension enables them to fit directly on the Tillett STRO and PTRO seat adjustment runners. (Please note we advise against using any seat adjustment runners in a race car, as they are only intended for road use).
